A4/S4/RS4, A5/S5/RS5, A6/S6/RS6, A8/S8, Audi, Audi A6 C6 4F (2004-2011), Audi A8 D3 (2002-2009), Audi Q7 4L (2005-2015), B8 (2007-), Q7

MMI 2G software update to version 5570

Each MMI 2G software update brought stability and performance fixes for bluetooth, GPS navigation, amplifier, radio & TV tuner. Also some new features were introduced with Audi Multi Media Interface updates, like GPS map 3D view from software version no. 3460.

MMI 2G software update to version 5570

MMI 2G software update – versions and features

  • Europe 2120
    1. Volume limit increased.
    2. Navigation announcements muted while phone call.
    3. Music volume lowered while navigation announcements.
    4. Direction arrows when searching POI.
    5. Map label at low zoom fix
  • Europe 3460
    1. 3D maps (bird-view).
    2. Fixes for CD chaners, radio tuner, amplifiers, bluetooth, TV tuner, DAB.
  • Europe 4220
    1. AMI USB sources support.
    2. Enhance user interface graphics.
    3. Fixes for CD chaners, radio tuner, amplifiers, bluetooth, TV tuner, DAB.
  • Europe 5150, USA 3360, Russia 5540
    1. AMI iPod compatibility
    2. AMI support for ACC and WAV files over USB
    3. Bluetooth handsfree fixes
  • Europe 5570, USA 4610, Russia 6030
    1. Convenient switching between media sources.
    2. Fixed for amplifier, TV tuner, MP3 CD changer, head unit.

Audi dropped support for MMI 2G software updates at version 5570 but continues to publish GPS map DVDs each year for this system.

Tools

  • 3 CDs set with update software
    • Europe A6, A8, Q7: 4L0 998 961
    • Europe A4, A5: 8K0 998 961
    • USA: 4F0 998 961
  • Battery charger

Warning!

Performing this procedure may cause permanent damage to your car.
If you have installed aftermarket language pack it will be overwritten.
Do this at your own risk!
We are not responsible for any loss or damage.

Preparation

  • Make sure that you have in you car Audi Multi Media Interface 2G (MMI 2G). Check details in article Audi navigation systems – MMI RNS BNS RMC differences.
  • Check you current software version and confirm that it is lower than 5570.
    Navigate to CARSETUPVersion and check SW line. First 4 digits are representing current software version.
  • Update procedure can take couple hours. It’s important to eliminate any power shortage. If you battery condition is poor we recommend to use battery charger while performing this procedure.
  • Turn of any unnecessary devices that can cause battery drain while key is in ACC position (HVAC system, interior and exterior lights, audio system, phone charger). During this procedure don’t use any electrical accessories (electric windows, power seats, central lock, electric boot lid).
  • Take out all CDs from the CD changer that is in the glovebox or in the center console.
Audi Multi Media Interface 2G software version 5140
Audi Multi Media Interface 2G software version 5140

MMI 2G software update version EU 5150 / USA 3360 / Russia 5540 – procedure

It is possible to update to version 5570 only from software 5150 or higher. This step is necessary only if you are currently running software version lower than 5150.

  1. Turn the key to position II and wait for Audi Multi Media Interface to start.
  2. Load CD1 into first slot in the CD changer.
  3. Press and hold buttons SETUP and RETURN.
  4. After couple of second hidden red menu will appear. Release the buttons.
  5. Go to SWUpdateCD-ROM. Update CD content will be verified. Audio will mute.
  6. List of devices ready for update will appear on the screen. Scroll down to Start download position and confirm the update. This will take up to 40 minutes.
  7. When the update is done you will see update status. Scroll down to Restart MMI and press it. System will reboot and go back to normal operation mode.
  8. Take out first MMI 2G software update CD from the CD changer.
Audi MMI 2G after software update procedure
Audi MMI 2G after software update procedure

MMI 2G software update bluetooth

This is needed only if your car is equipped with bluetooth handsfree system.

Perform the update procedure twice using CD2.
You have to do it twice since first update procedure will erase bluetooth device memory. it will actually install new software the second time you run CD2 update.

MMI 2G software update version EU 5570 / US 4610 / Russia 6030

Perform the update procedure using CD3.

237 thoughts on “MMI 2G software update to version 5570

  • Pingback: Enable MMI hidden green menu (2G, 3G, 3G+) - mr-fix.info
  • Pingback: Audi MMI battery level status 2G 3G - mr-fix.info
  • Pingback: Audi MMI 2G aux audio source activation and wiring - mr-fix.info
  • Pingback: Audi MMI 2G hidden green menu description - mr-fix.info
  • Hi,
    very usufull info you have! i’m glad i find ur site.
    i’m looking if i can find a manual or a schematic for the bose ampli on my Q7; damaged by water leacking from sunroof.. i did not knew untill it blow.

    i read all the info you put. from where i can get the 3 CD mentionned in updating the MMI?
    My Q7 is 2007 model, now untill i fix or buy new bose audio i cannot access the MMI to check my MMI version.
    Thank You!

    • You can buy those CDs from your Audi dealer. It shouldn’t be expensive. You can find part no. in the article. Before buying confirm with your Audi dealer that those CDs will work on your car for sure.

  • Pingback: Audi MMI welcome screen change (boot logo 2G, 3G) - mr-fix.info
  • Hi

    When i press car and then setup it shows me no further settings available for the car menu :(
    What can I do to verify my version ?

  • HI Great instructions
    I have A6 2008 V8 with 2G high MMI, Nav, Bluetooth, rear view camera, CD changer and AMI. The problem is that my CD changer is not working anymore so I am not able to use the CDs for upgrade. I do have VSDC software and ODB2 cable.
    Is it possible to do the upgrade using ODB2 or through connecting a USB flash to the AMI
    Any help would be appreciated.

    • Hi. In my knowledge there are two ways to update MMI.
      Eighter by using disk and CD changer or with Audi diagnostic tool (VAS).
      OBD2 cable just with VCDS or VAG-COM will not let you update the MMI system. Sorry.

  • Hey i have a 2005 a6 4.2 my current software is 1070 what are my steps to upgrade to 5570 ? also i wanna configure
    My aux input my car has factory bose with out the back up camera how much do the update cds cost

    • With software versions as low as 1070 you need to use all 3 CDs from this tutorial.

    • For Audi MMI 2G there are no official language packs. Try your local Audi forum for advice and remember that installing aftermarket software modification will terminate your warranty.

  • Hi, I have a Q3 2014 model…It has a NAV button on the MMI but it says it is disabled.
    Can I upgrade the software to include GPS??
    Thanks

    • if you don’t have GPS it’s most likely not a matter of software update. You need hardware as well: GPS antenna, DVD drive for maps (of HDD inside MMI)…

  • Hi ,

    Great guide thank you. However a faced an issue. Could you explain me what else I can try. I got the factory upgrade Cd’s and I have 2G MMI low( with the red screen)
    When I insert the first cd after a couple of minutes my car saysERROR “no dada cd in drive”
    I tried with all slots and cleaned the whole cd charger but the same issue all the time.

    Local Audi dealer charge £189+VAT so I do not really want do it with theme.

    Thank your answer

    • Is your update CD set designed for low/basic version? Because High and Low/Basic MMI 2G systems are completely different.

    • Component Protection (CP) might turn itself or something gone wrong while updating radio receiver. Best if you check with diagnostic interface.

    • Try those CDs in your PC to check if your computer can read them without problem.
      Then empty the CD changer, place CD1 in slot 1, restart the MMI using three button combination (it’s here on the blog), when it start press and hold SETUP and RETURN, select SWUpdate and check if the CD will work.
      If not you should get a refund from whoever sold you those CDs.

  • Pingback: Audi MMI 2G enable ambient light (extended) - mr-fix.info
  • Your comment…My MMI screen is off. U press the MMI on/off button, the MMI screen saver comes on for a few seconds & it goes off.
    I had parked in the sun for a day(in Ghana). Could that be the reason? What can I do?

    • This might me a overheat problem or one of the MOST components is not working (amplifier, navigation, SDS, CD changer, tuner…). Check all fuses, then try scanning the car with diagnostic interface.

  • I accidentally clicked on the bootloader button in the green menu. Can you please help me exit?

  • Just bought an Audi A5 2008 , when I checked version it said SW 0130 , is this the basic version as I cannot even alter suspension ( hard ride , its a Quattro , sport) and how can I upgrade it , is it a case of purchasing the cd’s from audi ??

  • Hello. Very useful information, thanks! I have one question. I have Audi A8 D3(2003). When I update it with last version for 5570 something wrong. Because when everything is done my software is updated to 5150 not to 5570. Why is this problem? Maybe don’t have some modules for 5570? Thanks!

    • MMI 2G head unit alone should be updated to 5570. Please verify if your update CD data is not corrupt.

  • hi , am have 3 cd original , update sw first cd 350 to 390 , how to update last new version ??? thanks ;

    • Start screen logo is the same for all Audi audio systems which is confusing.
      For sure you don’t have MMI 2G system which was available only in A4, A5, A6, A8 and Q7.
      Most likely you don’t have MMI 3G system but RMC system (Radio Media Center).

  • I updated bc i accidently pressed the bootloader button, but now i have no steering-wheel commands, no display for parktronic (just sond) , and many others menus from “CAR” are not there anymore. all the settings are just the same as before the update, but now i have no acces to change them. PLS HELP. how do i get them back?. A6 4F 2008, MMI 2G High

    • You need to access hidden green menu and enable all missing features according to your cars equipment. Please check hidden green menu description for MMI 2G.

  • Hi,
    I updated the first CD with no problems. When I try to update with cd2 (BT device) I get the message that no device selected for update. What I understand the Handyvorb2 is the BT device but I can’t check any of the boxes (bootloader or application). What am I missing? I have MMI 2G Hi, with telephone connection in the car witch I think means that I have BT?

    Kind regards
    Ali

    • If CD2 does not indicate any pending updates then skip to CD3. Apparently not all BT modules needed CD2 update.

  • Can I update from 1190 straight to 5150 or should I do another version first. I have a 2006 Audi A8

  • I have a 2007 Q7 4.2l with MMI 2G 2740, I burned both ISOs on speed 10x, new laptops don’t have a lower speed, we tried the first CD the S/W update didn’t recognise the software, all devices said N/A, i burned a couple of CDs more same thing, then i tried to run the second CD immediately, and the devices recognised the CD, i started the download and everything completed except for the siruis, once i rebooted MMI worked fine, but some menu options did not view such as the battery indicator level, and most important Bluetooth did not work, i tried to downgrade to CD1 still same problem could not do anything, is there any solution to downgrade again to 2740 again and then re-upgrade maybe get the bluetooth working.
    By the way I downloaded the cd’s from this site: a6retrofit.com
    Please if there is any help
    Thank you.

    • Sometimes during the update (specially from old versions) coding and adaptation values go back to default. That’s why some options are missing, BT does not work…
      All you need to do is enter hidden green menu and enable those features according to your cars optional equipment.

  • Hi
    I tried several times to enter the hidden green menu, but I couldn’t,
    I followed the steps you mentioned in this site, but I fail to enter.
    Thank you

  • Hi
    Everytime I try to enter hidden green menu I get this message:
    There is no more available settings.
    In red screen
    Thank you

  • Hi
    I have 07 Audi Q7. the software version is 2740. The car has no NAV, rear camera, Bluetooth or hands-free feature. in my case, Is there a benefit from updating or not?
    Thx

    • If you don’t experience any issues with the system (lags or glitches) I don’t recommend performing this procedure. It will bring no new features.

  • Hi I’ve got a Q7 2006 AVUS with rear camera, and BT. My phone reach to connect the MMI but when I stop the car it loose the connection. I’ve tried to update the bluetooth module but it seems to do nothing. I see only “Restarting the device…” again and again. It also show 0 N.D the 1 N.D … but nothing seems to work. I’ve waited 1h at least. I’ve updated nav and mmi to 5570 without any problems and my DVD are brand new factory one’s.

    Any idea that could help ?

    • If you loose BT connection when turning off the car, you should visit electric workshop and check if BT module is powered correctly.

    • MMI 2G low (basic) uses monochromatic red screen.
      MMI 2G high uses full-color 16:9 7” screen.

  • Hi. I have run the 3CDs fine – and the update looks to have worked properly, but I cannot find the 3D maps on the sat nav. (I’ve got an Audi A6 Avant, 2006, with 2015 maps). What have I done wrong?
    Thanks.

  • Hi. I have update the MMI, but now when i turn of the MMI appears the MMI welcome screen . It is all right ???. When i have the old software the MMI turn off for real…. !!! Can you tell me if i have to change something from Settings ?

    • If you turn it off by press and hold of the volume knob, then yes – MMI logo should stay on the screen with small clock on the bottom.
      If you want to turn the display off, use button on the dashboard.

  • My 2002 A8 currently does not have blue tooth functionality, will updating the software remedy that?

    • No.
      If you want bluetooth in your car you need to retrofit BT module, microphones and code it.

  • Updates with success! But not without turning the engine on.

    I would like to post how this worked for me:
    – If your MMI does turn on after clicking the On/Off button, and immedietly after the Audi logo back off, don’t worry. Without the engine running, but power on this never worked for me.
    – Start the engine, keep it running for as long the 3CD updates takes
    – Go to the SW Update menu as in the tutorial
    – Put in CD1 (~25 min)
    -> Everything needed is auto selected, so you can just proceed the update
    – Put in CD2 (~2 min)
    -> if you have no bluetooth you will see nothing is selected for this CD.
    – Put in CD3 (~10 min)
    -> Everything needed is auto selected, so you can just proceed the update
    – Done!

  • Hello,

    I have an Audi A6 (2006). I updated MMI to version 5570 a while ago and all worked well. I had AMI retrofitted recently. I do not know which version AMI the software is. I have an iPod touch (5th gen) and attach it using an Audi 30 pin cable (4F0051510AG) and an Apple lightning adapter.

    When I try to use the iPod through AMI, it is hit-and-miss as to what happens. Sometimes it is fine and plays without any problems while sometimes it says the device does not have any playable tracks, or it might show some tracks but then freeze when I try to play them.

    Please can you help!

    Do I need to run the MMI update again / update AMI / or use a different cable??

    Many thanks for your help.

    • run the 5570 update again. You AMI module can have older software that’s not fully supported by the latest MMI head unit software.

    • Hi Gareth,
      I have had problems using a Bluetooth Viseeo WMA 1000 device plugged into AMI to play Apple Music from my iphone. I have had hit and miss playback and the “no playable tracks folder” on and off for a long time. I have software 4420 on my MMI. Have you solved your problems? mr -fix.info says run the update again but surely you would need the cd changer and ami connected to update it. Is that your set up?
      I look forward to your reply
      Kind regards
      Steve

  • Pingback: Audi q7 mmi version. Pls help - AudiWorld Forums
  • My car is audi a8 d3 2003 with mmi version 0770 . All i want is to enable audi optical parking .I have changed the parking module to version D which support optical display and coded the module to 02xxxxx but still no optical display when i put in reverse just acoustic. I dont want to update the mmi to 5150 as worry that it will damage the mmi. Is there any other way to enable the optical display Thanks

  • Hello
    My A8 mmi version is 0770 can i use the 3 cds to upgrade to 5570 directly to 5570. Will this update damage the mmi componet
    Thanks

    • Use all 3 CDs. First one will update your MMI to 5150, second is for handsfree system, third will update it to 5570.

  • Please tell me how to code the mmi 2g of audi a8 d3 to support optical parking display as i have already recode the parking module
    Many thanks

  • Hi,

    I need to update my MMI software for audi A6 and also update the navigation.
    How can I do this? I cant even get green menu either.

    I downloaded some program onto a CD but when I went to start download in the red menu I didnt start.

    I cant change anything in the red menu – it all seems dead.

    what can I do please?

  • Just bought an used 2007 Q7 with no Bluetooth, back camera, or navigation! Is there any hope of me getting these features? When you press knobs ( tele, nav…) it says not installed! Please can I add an aftermarket radio with these features and if so what kind? I’m a female in Chicago and I don’t want to be taken advantage of or damage my vehicle.
    Thanks in advance

    • Everything can be added. Please google for “Audi MMI 2G bluetooth retrofit” and so on…
      Are you sure that you have no navigation? You don’t have DVD drive under the trunk floor for the map disk?

  • Can i update my audi a8 d3 from version 0770 directly to 5570 using the 3 CDs 4L0998961without any intermediate update

  • Good morning. I purchased an Audi A6 quattro le man’s 3.0 diesel. I also have the update cd’s. The mmi version was way below 5.0 and so tried to load cd1. Followed instructions but no update after an hour so gave up! Is there any way of knowing whether the cd is actually uploading I. E any indication on screen?
    Thanks

    • Did you perform all steps from the tutorial? Empty the CD changer, put the update CD in slot 1, enter update menu with CAR and RETURN buttons?

  • Thanks for the speedy reply. Yes I had my phone with your tutorial in the car with me and was frightened to get out in case any electrical interference! It may be my slot 1 cd as I have the owner manual cd and a couple of times it says no cd inserted when it had been. Having said that when I went through the tutorial it recognised the cd rom and got to the point where display said software update do not use electric stuff (or words to that effect).

  • Hi i have successfully update my mmi from 0770 to 5570. But i have a fault code on the sound module 02084 component protection no or incorrect basic setting/adaptation static. The amp work perfect so i don’t know what the code is . I ve tried to clear the code but can not.Please advice
    Regards

    • Hi! While updating MMI and other components (amp, nav box, cd changer, tuner…) some of the devices might loose coding and adaptation values. Please check all components if coding is correct and it fit your car equipment.
      You can quick look for a 0000000 coding. If you can find empty coding, then try you have to analyze all modules.

  • Hello, I have 2005 A6 3.2 will update for MMI allow my to use my phone as Audio out Via BT?
    The car has bT enable for Phone calling

  • Hello I have Audi Q7, have a problem when comes to CD2 and try to start download for the 2nd time it states “no device is selected for updating” .

    I have carried on to disc 3 but my initial problem with telephone function not working is not fixed.

    • Maybe your phone module is broken/disconnected so it does not work and can not be updated.

  • I have q7 2007 bat the B.T is not working wat i shoold do?
    and if its posibol to apgrad the versun?
    and how can i do it?
    Thank in advans

    • Are you sure that you have bluetooth in your car? This is an optional equipment – not all Q7 have bluetooth.

  • My 2003 Audi parts A8 D3 has factory fitted bluetooth phone and phone cradle.I tried to connect my smart phone to the car telephone module using bluetooth but can’t pair.Also i use cd2 of 4L0998961to update the bluetooth but there is no update

    • CD2 is not always needed when updating MMI system. Even if bluetooth is installed.

  • I dont know if i have..but im sure that i have the microphon and the optional telphon ander the right hand …
    So wen presing the telphon nuten its show no thelphon instold..
    You can please tall me wer the bluetooth module is located in my car q7 2007 BUG 3.otdi quattro .and if ican upgrede the vesion i had 34.5.0

  • I keep getting error on Epatch.bin 176 error. tried it all different ways. any suggestions. dension 500 is in service mode too :(

  • Hello

    I updated my audi a6 2006, but i used the 2nd cd only one time, now bluetooth aint working anymore, i tried to repeat the update again, but now even with cd 1 the update doesnt start. i tried by removing the battery for 15 mins but still same, any suggestion? Thanks!

  • Hi
    I have a version 4140. 0709 , to what version I can upgrade , I’m leaving in US and how many CD’S I have to use?

  • After updating is it possible to have suspension issues? Also what can happen if the car was driven while being updated?

    • if you update while driving you’re risking the CD to skip track and bricking your MMI.

  • Hi I have a Japanese import audi a4 2008 with MMi High, can I still update using these disks?

  • Hi,
    My Navigation DVD is failing intermittenty. (wont display map). Looks like failing laser.
    I bought a second hand replacement but it fails to initialise. It is not component protected.
    If it came from a car with newer software than mine (4220) would that prevent it from working?
    Thanks. Neil

    • On each map DVD there’s a software included needed for maps to work. If the drive and discs are both OK, then it should just work.

    • You should buy original CDs at dealers. It cost like 10$ and you don’t need to worry about improperly burned CDs that will damage your MMI.

  • Hello, i’m stuck informação cd2 for more transferência 2 hours.

    It says initializing pheripheral and then for a second in contact With pheripheral.

    Is this normal?

  • I have inserted the first cd and have Bootloader (234>240) and Application (2120>5151) ticked…how can I tell if the update is actually happening?

  • Good evening mr-info, Nice tutorial.
    I have a problem instaling from 5150 to 5570. Bought the originals cd’s for updates. from CD 1 i’m getting error 176, from CD 3 i’m getting error 195. A lot of searching in internet found something out “zug”, maybe you an idea what to do, if i will go to local audi dealer i know it will cost a lot. interface box sw number 4f0910732s, index 5150, hw number 4e0035729, index h43. i’m out of ideas. Maybe you have some suggestions. Thank you.

  • Hi!
    When updating my A8 MMI HIGH gen 2 to 5570 I get the following message: “Audi mmi, following device is not in download mode: AMI”. And the AMI is not updated neither when using disc 1 nor disc 3. Everything else seems to be upgraded and to be working just fine. Tried to unplug the “AMI-cable” but that didn’t help.

    Best regards
    Magnus

    • I’m not sure if remember correctly, but alternatively you can update AMI with Usb drive connected as AMI source.

  • Hi,
    **HELP**
    MMI does not load after using CD2. The CD was ran twice. First it updated “OK” ran a second time there was an “S”. After updating and restarting MMI it failed to turn back on completely dead. (VCDS Address 07: Control Head
    Cannot be reached)

    Please Help!!!!

  • Hi:
    Firstly great work!
    I have a 2009 Q7 (USA) that i recently updated the nav disc. Now the navigation seems to drop from maps to the destination (where you enter the destination) screen on its own. Any idea what might be causing that?
    thx.

  • Hi! Excellent info here.
    Could you please help we? I have a 2005 Audi A6 SW: HU C6-6350 11.1.0 0442 but I cannot access the secret green menu. It says no more options. On the red menu on the SW- index: 1110 cannot edit info either. Want to change the screen logo and to erase the service warning beep. Thank you.

  • Hi!,
    I bought an A5 from the US market and the maps , software is from that country.
    Can I change the software to the ureopean version by myself?
    wich type of procedure I have to do?
    thank you

    • You need to get update CDs for Europe (or whatever region you want to use), recode and update the software.

  • I’ve got a Audi A5 07, I’ve entered the 1disc of 3 and and done it all, at the end it says go the restart mmi, I’ve done this then my screen went blank and never come back on?? Now none of the mmi lights and up buttons or the screen?

  • Hi, I have a 2008 A4 Avant with MMI 2G. Hidden menu doesn’t appear after pushing Setup and Car (I pushed Setup first, then Car).
    Any chance that an update to version 5570 (current version is 5140) will make the menu available or won’t that make any difference. If so, what can I do to use the hidden menu?
    Thanks!

  • My car is a A6 AVANT 3.2FSI QUATTRO with MMI 2G. In MMI the SW number is C6-HU 6362 07.4.0 0444, which is a strange software version number when comparing with what other audi owners post on the web. I’m wondering if it is a different software version regime because of its Japanese origination or language pack.
    I want to upgrade my MMI system using the MMI 2G software update to version 5570 via the red screen and loading the cd’s one by one (3 in total). I’m hoping this will overwrite the japanese language pack currently loaded onto my MMI system. Do I load the Euro version or is their an Aus NZ version I should be looking for?

    • Yes yours is different as is Japanese. It will be older 2005 software release.
      You can upgrade using the euro cds but you will lose ur radio and require a European K box replacement ($149 off ebay)

  • Hi guys, how its possible that i cannot access the red menu to pick swupdate option? any ideas? i try all combinations but no success :(:(

    • Red menu can not be locked. You should be able to access it as long as you have MMI 2G system, using correct buttons in correct order.

  • Hi, i have an AUDI Q3 My 2012 European model without navigator (only 1 SD slot), my MMI software is: RMC EU P11474, if i upgrade to the latest versione 5570 i will have in the green menù the “CAR” function and i will can activate the battery level ?
    I have the software VCDS ver. 15.7
    thank you

    • You don’t have MMI. You have RMC.
      5570 update was for MMI 2G, which was never installed in Q3.

  • hi, i have tried updating my mmi 2g high and cd1 went successful, i then put in cd2 which came up with a fail and asked if i wanted to retry,i clicked on retry and it just froze, left it for hours and nothing happened,even taking key out it stayed on, in the end i had to disconnect battery, now the mmi boots up but radio etc works then goes off for a second etc, whenever i try to do anything it just keeps jumping,it doesn’t display anything anymore for heated seats a/c,parking etc, and if i try the update again it just stays on reading meta data information and does not change, please help

  • Dear Mr-fix,
    I have try to make the update to the A6 of my father, CD1 seem to go well, but after the reboot, I cannot access to the update menu anymore (setup-return)!
    Do you have any idea?
    Thanks a lot in advance!

  • Great advice so far!
    Installed CD2 and it took approx 6mins and restarted the MMI automatically. Then installed CD2 again to make the Bluetooth work (Bluetooth worked with iPhone before this update) and the install seems to be taking a long time (over an hour) is that normal?

  • Hi, I have SW: B8-HU 51.7.0 0741
    Do i need the update ‘4L0-998-961 5570’
    or i already have it installed

    Kind Regards

    • The only new firmware versions on the European 5570 update CD are for the following MMI components:
      B & O amplifier – new version is 320
      Tuner – new version is 630
      HybridTV – new version is 470
      MMI [aka Control Head] – new version is 5570

  • Hello,
    I try to update but get error metaininfo.txt in line 2269, try with cd version 3360 and get no disk loaded.
    I have this:
    interfacebox c6stdplus_0010
    Mobile-adap 1130
    Amp. Basis 0320
    Gateway 0070

    Any clue?

  • Hi
    I have audi Q5 2014…and how I now what upgrade I can make on it?
    I have DVD and two SD slots but I can listen music if I have navigator on. :(
    Is it possible to run navigator from SD slot and music listen from DVD?
    TNX

  • Hello there,

    will the same software for USA work for 2G Low and High or are there different software for each?

  • Hi, I got a 2007 Q7 without BT and Nav. The sw version it’s 28.6.0 can I update to this version if it’s got a Bose sound system ? How can I add BT to it? Thanks

    • Yes you can update. Use CD1, then CD3.
      You can retrofit bluetooth to this car. You’ll need BT module, microphone, some wiring (if your car is missing it) and diagnostic interface to code it.

  • Hi, i have a 08 q7 ,I have following to update mmi from 5150 to 5570 with the 3rd Cd, but it keeps opening file to unlock a lot of files over 24 hrs still not yet finish the update, what’s wrong I missed, I am dare to stop it , but I don,t know how long I need to wait and I wanted to know how many files need to open? Old help

  • I think updating my software on my 2007 Audi C6 Avant and enabling battery monitor has caused a problem where the car now does not go into standby and or shut down electrical components which is causing my battery to slowly drain overnight causing a low battery warning every morning and no exterior and interior lights on dark mornings. Can anyone help with how to fix this, I am thinking it will need to be rolled back! Is this possible?

  • Great site. Just bought Audi A6 2007 which has MMI 2G High and which is running version 4220. There is no Bluetooth. I am considering having the Fiscon BT kit fitted. What is the best order? Fit Fiscon then do software update? Or update to 5150, then fit Fiscon, then do BT update on CD2 and finally CD3? Is there a risk that updates could cause Fiscon to fall over?

    Many thanks!

    • CD2 updates only original devices so you don’t even have to try running it.
      First do full update to 5570, then connect whatever you want.

  • For me it says that “Metainfo cannot be annalysed” when i do put 1st or any of those three discs. Ive been downloading those files from [CUT] this link. and the car ive got is audi a6 2005 with MMI 2g high. this is the picture of system info http://imgur.com/a/YnHsE . Any advice? thx

    • Most likely disk image is damaged/fake or CD is burned incorrectly. I do not recommend using self-burned update disk. THere’s a risk of bricking your MMI.

  • Hello,

    I have a 2007 A6 2.0tdi with what I believe is 2g MMI High, I went through all the disks fine but when finished I had no BT ( says phone not installed when pushing tel button ) …when trying to run disk 2 again, it says “n/a” against all the modules and it will not progress with the update again……any ideas please?

    Cheers

  • hello i have tried to update (’06 q7)
    but i cant install the software,

    it shows “unvollstandige memodaten fur eeprom-update der mmi (v2.1.1c.27.7.2b.c.2.crc 0x1ea200ed). andere cd verwenden.

    i have the software version 4220
    am i doing anytging wrong?
    friendly greetings

  • Hi have genuine disks and a 2007 A5.
    Disc 2 lists 1 update for Bta but won’t start.
    Just says ‘initialise the device’
    I definitely have bluetooth in car.

  • hello
    i bought copies of these CD that seem to work ( reading comments )
    but the update with the first CD didn’t finish…
    so i cancelled the update and after , no sound.
    The sound is muted , and i cant listen any sound now.
    with vcds , the MOST diag says that the sonorisation is KO for electrical and optical loop.
    i tried to make another update , but the CD player can’t now read it , he blocks at the step “reading meta informations…” and don’t go the next step.

    So , i would like to know if i switch the CD player , it will be possible to launch another update or the AMP is broken ?
    thanks

  • Hi i have an audi a 6. 2006 with software version. 38.3.0 can i do the update to 5570.thanks

  • Hi, Few questions. I have USA version 2009 Audi A4 (B8 Model) my Radio No: 8T1035186R Display N: 8T0919603A HW: H01 SW: 0301. I believe I have 2G High. Would this update work for my system? I am having issue with the radio drawing voltage and someone said if I update the firmware it will fix the issue. Thank you kindly!

  • Hi,
    I have an Audi 2007 Q7. The MMI has red light .. it includes TV etc.. but sound keeps jittering and lagging.. im trying to upgrade using CD rom but it says “metainfo2.txt not found!”

    Any idea how i can update? Current version is 28.3.0 0612

  • I have a USA 07 D3 A8L I do believe I have a MMI 2G high with this version
    SW: D3-HU 46.1.0 0805 can this be updated to 5570 or do I have the highest one.
    Here are the rest of the numbers on the screen.
    HW: D3-HU 6348D2.0, FC SW: 06231AFC6AB320050, FC PS: 0050 FC HW: H01
    from what I am seeing is I can update my Nav Maps only

  • Hi,
    Great site. Very useful information !
    I am looking to update my MMI 2g Basic to MMI Basic plus or higher . What would be the best way to do it ?

    Thanks for your help

  • hi mr fixit
    I have Audi A* 2006, with MMI 2g high, bluetooth etc. and factory prep phone installation. Will this update enable full bluetooth connectivity with current smartphones? i.e. Addressbook, call history, music play etc

    If not, updating seems pointless

  • Hi. I have Audi A6 C6 2.7 TDI, with 5570 Software. Can u help pls, how can i hungarian language installing?

  • Hi is it possible to update from version 0770 straight to EU 5150. I have 2004 Audi A8 4.0d D3 MMI 2G. Thanks

  • Hi is it possible to update from version 0770 straight to EU 5150. I have 2004 Audi A8 4.0d D3 MMI 2G. Thanks

  • Hi mr-fix,
    I have a 2006 Audi A6 Avant in USA with I believe it is MMI 2G high. SW: 6360 I have navigation and phone cradle but I don’t see where I can activate the Bluetooth to connect to my smartphone. First, How do I know if I have Bluetooth capability? Second, Will the update automatically activate the Bluetooth option?
    Thank you so much! Your website is very helpful.

  • Hello, I just bought a 2012 Audi A8L my signal with SIRIUS xm breaks in and out all day long. It says 2g on the dash, is there a way to switch to 3g for a better connection?

  • Hi, I have an audi a6 c6 4f 2005 and my software version is 0500, can I update with these 3 cd’s or should I update first to a more closer version and only after that start using these cd’s?

  • I have tried several different cds and none seem to work. Im stuck on boot screen and it will keep loading but says no meta data found. Can you please help?

  • Hi,just update soft to 5570, sat nav can’t find car location? any ideas. many Thank
    P.S. audi q7 2007

  • I have been following your instructions to try to update my 2008 A6 version 51.4.0.0731 to version 5570 but I am stuck. I cannot get the hidden red menu to appear when I press and hold buttons SETUP and RETURN. Do you have any suggestions?

  • Hi mr.fix.
    I’m not sure wich sw number is correct in my A6 C6 2005. It says SW: C6-HU 6350 12.0.0 0513. Wich number is it? Is it 6350 or 12.0.0, and is it possible to upgrade from 1200 directly to latest version?

  • Hi,
    Thank you for the tutorial!
    I tried to buy the CDs indicated but the seller said it would not work for my car (that it is too old).
    I have an Audi A8 2005-2006, the software version is 11.1.0, would these CDs work or not?
    Also, I have an integrated phone (Nokia style), does that means that I have Bluetooth and I could regain functionality for others phones with the update?

    Thank you in advance.
    Best Regards,

  • I have some extra MMI 2G update cds lying around. I have already updated my Q7 successfully with them. Feel free to contact me in case you need them. All are tried, and tested CDs.

  • My US 07 Audi Q7 with SW: AU-HU 46.1.0 0805. I ordered 4F0 998 961 which only comes with 2 CDs (CD1 and CD2) from Audi Parts Dealer. This instruction mentions in subtitle:

    MMI 2G software update version EU 5150 / USA 3360 / Russia 5540 – procedure for CD1

    and

    MMI 2G software update version EU 5570 / US 4610 / Russia 6030 for CD3

    Does it mean, I have US 4610 already, so I only need to run CD3 ?

  • Hi,
    I have Audi A6 2008, There is no Bluetooth and Telephone not installed. If I update to mmi is its works bt.
    Thanks.

  • Hi, I get “error 129 from device” after disc one and now it also says “radio not installed” if I try to use my radio as normal!
    Official discs used
    Thanks

  • I tried doing this, but the install was interrupted.

    I have a 2008 2G MMI. The update seemed to start fine, and then got hung up at 6%. I guess it probably wasn’t “hung up” as you said the update can take a few hours. As I was sitting in my car during the update, I got a call that went to blue tooth. After the 5 minute call, I turned the car off without thinking.

    Now the lights on the nav unit flash red, the MMI says “navigation not installed”. When I go into VAGCOM says “controller not found” in the 37-navigation selection.

    What do I do to have the nav unit recognized again?

    (Thanks for the great website!)

    • All sorted. I disconnected the nav unit, then reconnected. Inserted original DVD and the display said “initializing.” Nav is fully functional again!

      My version appears to be 5071. So, I can get the update discs from the dealer and do the update myself? My bluetooth can be a bit flaky, so I’m hoping it will fix that.

  • Audi a6 mmi 2g version 3460 (if necessary update ver 4220 frst or direct 5570!!! Thanks

  • HI
    Any hint´s to as where U can download the CD´s?
    Seems vaglife.dk isn´t working anymore
    Regards Michael

  • Hello there

    Firstly, thank you for this guide – it has been very helpful.

    I have an MMI problem, and wonder, if by chance, you might know the answer? The rear wash/wipe pipe leaked, and leaked water on the media stack. This affected the smooth running of the MMI system, and also caused the car to not shut down properly, which caused a battery drain, as the car was never fully shutting down.

    An auto-electrician has first changed the amp, and then the radio tuner. This has helped, but not cured the problem, in that instead of the car never shutting down at all, it now shuts down after 2 hours. So, at least the car still starts after sitting for 2-3 days parked.

    Would you be expert enough to help diagnose (with additional information) why the car is still taking 2 hours to shut down? I have VCDS, and now that the new amp and tuner are in, VCDS reports zero faults at all – so I’ve got nowhere to start looking!

    I’ve followed the upgrade instructions above, with the gen Audi disks, and the MMI is now running 5570 software.

    What I did find earlier today, whilst looking through the secret red menu, is that when you click on either the Amp or the radio tuner, or the MMI option within the main red menu, and then click on (iirc) ILC in the top left corner, and start looking through the log files, I can see that there are many hundreds of log files under each component of the system – most of them are very recent (from today in the last few days and weeks) – 256 log files in most components and 1,000 log files within the tuner – I had wondered if these needed clearing or anything like that for example? I don’t know where to go next!

  • Hi, my version info shows that:
    Radio nro: 8T1035195AC
    screen nro: 0919603F
    HW: H07
    SW: 0351
    I cant access to green menu using SETUP + CAR
    Could you please guide me?

  • Hi. I live in Norway and I have an Audi A8 2004 american model. The radio has been utgaded to european standard. The MMI system is 2740. Can I update to 5570 using 3 european disks?

  • Hello, I have problem. I have Audi Q7 2006. I made update from 4220 to 5570 via 3CD. Now, it is repeatly disconnecting. When i play music from CD or radio, it plays 10s and then it stops for 3s and again and again. a cant connect it with diagnostic on pc because of it. Now i cannot change values in steering-wheel and park camera ( sond ). My car is completly stupid. i tried update again and no change. Are they some ways to fix it? Return it to older version? Make some recovery? Thanks :)

  • I have a 2009 Audi A4 w/ 2G High MMI , It currently has sw version 46.1.0 & doesnt work all that well
    vcds is saying that
    Faults Found:
    01043 – Control Module; Incorrect Software Version
    Should i update to 5570?

  • I’m trying to update my a6 with MMI 2g high, software version 3450, I downloaded the files from an Audi forum but they don’t work. I’m getting this error which I’ve translated to English. Can anyone help.
    Swupdate incomplete metadata for him repro update. (V1.1.1b.25.7.2a.c.2, crc 0xc67b6851. Use another CD. Gging the 17:44 swupde

    Many thanks

  • Hi Mr Fix, I’ve upgraded from 3450 to 5570 ok, but all displays appear to be the same, and there’s no track info on cds when playing, just track 01, 02 at. Any ideas.
    Thanks

  • Hi,
    Just a quick question that wasn’t answered yet.
    If I don’t have a battery charger can I have my car running in P and update software?
    Or it’s not recommended and can damage MMI?
    Thank you,

  • Hello,
    I’m in Japan with a 2007 Q7 MMI 2G high & would like to upgrade with the 5570 cds, which I got from a friend in the UK, but do you think this would be ok? He says he used them to upgrade on a car with the same software version as mine (14.7.0), but wondering what trouble I might run into by doing this? Will I lose my radio function? Sorry to bother you but if you could help me since I can’t seem to get a decent answer from a Japan dealer, I would greatly appreciate your help!
    Thank you in advance

  • Hi,
    i cant find any reasonable suggestion or solution. First i cant find digital speedometer, yes i have tried from right side joystick under the steering wheel. Once went to Audi center and asked and they said maybe its not installed in software from begining. Then one mechanic said that in this model, there isn’t any digital speedometer.
    the second problem i have had that small display in middle (where it suppose to show digital speedometer) don’t work unless i drive for few hours, and then rear and front sensors don’t work, well it use to work after driving for while but now censors don’t work at all. i have checked the censors and they all are working (hearing closely if they clicking).
    would appreciate your suggestion.

  • Hi,
    can I update my MMI Version c6-hu 03.6.0 0336 directly to 5150 and then to 5570, or do I need to update first an older version?

  • Hi,
    Tried CD1 number of times.
    One update only, but update unsuccessful: AMI not in download mode.
    Any help please.

  • Hi,
    During CD1 update (only AMI available) got a message: AMI not in download mode.
    Please help.

  • Got the OEM CD’s, 0, 1, 2, 3.
    With CD 0, the MMI keeps saying “reading meta information”. Left it for about 2 hours, no result.
    It isn’t locked up or anything, I can cancel using the return button no problem. Is it supposed to take that long?

  • Do I have to use CD2 again after using CD3? For now my software is 3460, so if I get it right, I have to update first to 5150 with CD1, the update with CD2 TWICE (because of bluetooth module), and then update with CD3 from 5150 to 5570? Or do I need use CD2 TWICE again? Thanks.

  • I have an Audi Q7 2009, the sat nav, music, parking assist, electric mirrors not working, my garage advised me to change the MMI, this was changed, MMI 2G, but this time it comes on and goes off again. please help.
    Tanx.

  • Hello my friend, can these discs help me get out from bootloader screen?? My mmi 2g high now is in bootloader mode, can i get out from there whit these update disks?

  • Worked well. Didn’t take too long. Did it without engine running and without battery on charge (new-ish battery in car though). No idea what’s changed but all updated with no problems except a CRC error at the end of disc 3, which a retry fixed.

    Didn’t allow the Tune2Air or other Bluetooth AMI connections to work still though (my reason for the upgrade as had been told it needs the latest software) but that’s another issue entirely.

  • Hello I have situation is Sydneli pres boot loader and on the screan ask for update cd, and my cd changer vas brok, I take nother cd changer from donor car and Just plug in on (not any adaptation or coding)the car and put in update cd 1 , and update proces is started, when proces finish mmi is start up and almost is ok. Version on mmi is 5150.I take out donor cd changer and put in original mmi start up and is ok. Firstly no sound on radio and after erase Error vith vcds sound is back.And I have 2 problems …1 is command on steering wheels not vork, HOW TO FIX THAT..and when try update from 5150 to 5570 in mmi update setup is write on the screan DEVICE FOR UPDATE NOT FIND.. and in vcds I have 2 error 1 is adaptation for device not ok , and coding device not ok..

  • Hi. Did it succesfully from 5140 to 5150, then 5570, Audi A6 2008, 2.7tdi avant quattro with dsp sound, navi, cd changer, parking camera. No bluetooth, bose or tv tuner.
    Burned the discs at 8x with ImgBurn. I had some Taiyo Yuden, original Japanese CDs, branded JVC at about 1.5$ per piece, preserved especially for this sort of occasions.
    After pressing setup+return i turned on the engine as my battery is a little weak.
    I have MMI 2g High
    From 5140 to 5150 it only updated MMI HI.
    From 5150 to 5570 updated MMI HI and radio tuner.
    All completed in 15min.
    Thank you!

  • Hi
    I import audi from Japan to UK. Sat nav is still in Japanese language and radio tuner. Will software update will sort out my sat nav and radio frequency.?

  • HI, MY VERSION OF MMI IS THIS:
    SW: B8-HU 51.7.0 0741
    WHAT MMI I HAVE? AND FROM WHERE AND WHICH UPDATE I CAN DOWLOAD?
    THANKS.
    CYPRUS.

  • I need to update the software in my Audi A4 (2007) to MMI 2G version 5570 and want to check which disc I need to get. The current version I have is:
    SW: 0600
    HW: H99
    Map: 8P0919884_R_EUW
    Are you able to offer any advice please?

  • Hi.
    I recently purchased a 2013 TT with Audi Navigation plus MMI 2g high. I have cd1 and cd 2 with 2013 maps. Will these 3 cd’s work as an update? do they include also Malta map as it is not found in 2013 edition.
    thank you so much.

  • Hello. I have a 2008 Audi a4 B8 and when i check my software from the car menu its shows me a software version of 4690. I couldnt find any info regarding that version from this article. What does that mean? I wanted to use VAC COM to see if i could enable some ectra features on my car but before i start using the VAC COM do i have to update the MMI software? if so then what cd-s should i use ant etcetera?

  • Hi there,

    I have an S8 form 2008 with a 2G high on 5140 version. I was about to buy the 3 CD for the update to 5570 (Part – 4L0 998 961) but you say i need first to upgrade from 5140 to 5150 and than to 5570, correct ?
    So apart of the 3 cd to update from 5150 to 5570 i will need to buy another 3 cds to update from 5140 to 5150 ? or…..

    Thanks for the support

  • Hi,
    My 2004 A8 MMI version is 0770,when i inset cd1 and begin update,it always said”reading meta infomation” and never go on.

  • Hi, not sure if this thread is still active or not, but thought I would give it a try!
    I have just updated my Audi A8 D3 from software 1110 to 5150 and I have lost the speech dialogue system (SDS) on the red screen it says ‘SDS D3 Not OK’
    Can you help me please to fix this. I have access to VCDS if I need to use that to get the SDS back.
    Thanks in advance.

  • Hello, it is an old topic but my question is ?
    AUDI A4 B8 MMI 2G, 2009 year, is fitted with original handsfree (bluetooh connection/no music), after some time it had stopped to work, anyone had a similar issue. Other stuff with MMI are working. Only phone screen sending message Telephone is not installed!
    Software version : B8-BU 51.7.0 0741
    Thnx

Comments are closed.