With Mitsubishi Multi Communication System – MMCS hidden menu you can easily access tests and diagnostic data. Thanks to this service mode you can check CAN communication with other hardware (DVD drive, video input, rear view camera, TMC antenna), speed sensor, gyroscope, GPS antenna, touch sensor precision, LCD screen, software version and many more.
MMCS was installed in cars:
- Mistubishi ASX
- Mistubishi Lancer X
- Mistubishi Outlander
- Mistubishi Pajero
Warning!
Performing this procedure may cause permanent damage to your car.
Do this at your own risk!
We are not responsible for any loss or damage.
MMCS hidden menu procedure
- Turn the engine on. You can also just turn the key to II position, but one of the tests require to drive the car for a while.
- Wait for the MMCS to start.
- Press and hold both SET and NAVI buttons. After few seconds hidden menu will appear on the screen.
- Release the buttons.
MMCS hidden menu description
MMCS hidden menu description
- Vehicle Signal Check
- Speed – vehicle speed signal
- ILL – instrument cluster illumination
- Shift Position R – reverse gear state
- Monitor Check
- Color stripes
- Grey stripes
- Square pattern
- White
- Black
- Red
- Green
- Blue
- blank
- Network/Connect Line Check
- DVD Drive
- HDD Drive
- SDRAM
- Rear Camera
- GPS Receiver
- Rear Seat Display
- Premium Audio
- CAN BOX
- Video Input
- TMC Antenna
- Speaker Check
- FTWL – front left high tone
- FTWR – front right high tone
- FL – front left
- FR – front right
- RL – rear left
- RR – rear right
- RW – rear subwoofer
- Versions Indication
- Loader
- Application
- Navi Sub Microcomputer
- Audio Mictrocomputer
- Map Data
- Monitor
- CAN Box
- CAN Box Load
- Sensor Check
- Speed Sensor
- Gyro Sensor
- Touch Switch Confirmation
- CAN Communication Confirmation
- List Of Connection Equipment
- HVAC
- HFM
- FCM
- ORC
- CCN
- WCM
- Version Indicator
- Hardware
- CAN MATRIX
- NM
- TPMC
- DIAG
- Software
- CAN DRIVER
- KWP2000
- DBCOM
- CAN BOX Memory Data Indication
- Various Data
- Coding Data
- VIN
- Tell-Tale Stack
- Chrono Stack
- List Of Connection Equipment
- Memory Initialization
- TMC Sensitivity
- PI Code / DB Num
- PS Name
- Frequency
- Service ID
- S-Meter
- Q-Factor
- Status
- TMC Search
- TMC Manual Setting
- Versions Log Information
- Service Data Log
- Time Adjustment Log
I have a 2010 outlander and my mmcs doesn’t have set or navi button.
Is there anything else I can press to enter menu?
I have a 2004 Pajero my mmc has Japanese labels. How do I know their English equivalents?
Hi, my 2011 NT Pajero has MMCS. Today I got the car back from a service where they disconnected the battery, the MMCS now comes up with a no Maps DVD fault. it appears the map version which was in the lower DVD slot was not a genuine Mitsubishi DVD. I had an original in my glovebox which the mechanic put in the top slot. So now nothing works, and the original DVD is stuck in the top slot, can I remove the DVD from the top slot somehow? Or do I have to get hold of a genuine MMCS DVD?
My MAINTENANCE MENU (INFO) has disappeared…. How can I do a factory reset on mmcs?
i have the mitsubishi outlander disel.i bout it in 2008.my problem is in the MMCS.the hard disk is started to jumb and the hole system is not working.where can i find a new programing disk or where can i send the houl system for repear.
i have the mitsubishi outlander disel.i bout it in 2008.my problem is in the MMCS.the hard disk is started to jumb and the hole system is not working.where can i find a new programing disk or where can i send the houl system for repear.
I have a 2012 Pajero and my MMCS doesn’t have Set or Navi button. What buttons should I use?
I have a 2015 ASX : bought map update, but update sequence has frozen before I could even
enter the Authentication Code – now, no SatNav and no audio system
Hi, my 2011 NT Pajero has MMCS. Today I got the car back from a service where they disconnected the battery, the MMCS now comes up with a no Maps DVD fault. it appears the map version which was in the lower DVD slot was not a genuine Mitsubishi DVD. I had an original in my glovebox which the mechanic put in the top slot. So now nothing works, and the original DVD is stuck in the top slot, can I remove the DVD from the top slot somehow? Or do I have to get hold of a genuine MMCS DVD?
Non riesco a mettere la MN
I don’t have the ability to attack the phone ….. it may be that I have to update the software
How do you turn on audio