4G (2010-), 8U (2011-), 8X (2010-), A1/S1, A6/S6/RS6, A7/S7/RS7, Audi, C7 (2011-), Q3/RS Q3

Audi RMC hidden green menu

Hidden menu in Audi RMC system lets you access and change some of the navigation and multimedia system parameters. Hidden green diagnostic menu can be useful when diagnosing faulty radio tuner, GPS antenna receiver, reverse camera and other system components.

Warning!

Performing this procedure may cause permanent damage to your car.
Do this at your own risk!
We are not responsible for any loss or damage.

Preparation

Tools

  • If your Audi RMC system hidden green menu needs to be enabled first, you need to use diagnostic interface like VCDS or similar.

Warning!

Performing this procedure may cause permanent damage to your car.
Do this at your own risk!
We are not responsible for any loss or damage

Audi RMC hidden green menu activation

  1. Connect with module 5F – Control Head.
  2. Choose procedure 10 – Adaptation.
  3. Choose Channel 5 and read stored value (should be 0).
  4. Enter new value: 1
  5. Save new adaptation value.
  6. Exit.

How to enter hidden green menu in Audi RMC system

  1. Turn key into II position and wait for the Audi RMC system to start. You can also use keyless buttons.
  2. To be sure that your system rebooted press at the same time three buttons:
    • MENU
    • Control wheel
    • Upper-right function key
  3. Wait for the system to restart.
  4. Press and hold buttons MENU and CAR.
  5. After couple of seconds hidden green menu will appear. You can now release the buttons.
  6. Navigate through the hidden menu with control wheel. Don’t change any values unless you’re sure what you are doing.

Leave a Reply

Your email address will not be published. Required fields are marked *